Topic: Unable to mount second hard drive

I'm new to BSD and am trying to mount a secondary hard drive, but all the commands that I am familiar with do not work.

Here is a paste of my terminal:

# disklabel wd1
# /dev/rwd1c:
type: ESDI
disk: ESDI/IDE disk
label: ST380021A       
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 9729
total sectors: 156301488
rpm: 3600
interleave: 1
boundstart: 0
boundend: 156301488
drivedata: 0

16 partitions:
#                size           offset  fstype [fsize bsize  cpg]
  c:        156301488                0  unused                   
  i:        156299264             2048  ext2fs                   

# mount -t ext2fs /dev/wd1i /mnt
mount_ext2fs: /dev/wd1i on /mnt: Block device required

# mount -t ext2fs /dev/wd1c /mnt
mount_ext2fs: /dev/wd1c on /mnt: Input/output error

# mount -t ext2fs /dev/rwd1i /mnt
mount_ext2fs: /dev/rwd1i on /mnt: Block device required

# mount -t ext2fs /dev/rwd1c /mnt
mount_ext2fs: /dev/rwd1c on /mnt: Block device required

# fdisk wd1
Disk: wd1       geometry: 9729/255/63 [156301488 Sectors]
Offset: 0       Signature: 0xAA55
            Starting         Ending         LBA Info:
#: id      C   H   S -      C   H   S [       start:        size ]
-------------------------------------------------------------------------------
0: 83      0  32  33 -   9729  78  13 [        2048:   156299264 ] Linux files*
1: 00      0   0   0 -      0   0   0 [           0:           0 ] unused     
2: 00      0   0   0 -      0   0   0 [           0:           0 ] unused     
3: 00      0   0   0 -      0   0   0 [           0:           0 ] unused     

# mount -t ext2fs /dev/rwd1 /mnt 
mount_ext2fs: /dev/rwd1 on /mnt: No such file or directory

What am I missing here?  Probably something simple, but it has been a long night getting everything up and running and my mind is beginning to slip.  Any insight into this matter would be greatly appreciated.

Re: Unable to mount second hard drive

What does fdisk /dev/wd1 say ?

<wintellect> NetBSD users are smart enough to accept that there's no 3D support tongue